back to overview
  • Pack

Emonio P3 50mm

Tax included Shipping excluded in stock

Emonio P3 complete with 3 x 50mm Rogowski Coils with inner width of 50mm for measurements of up to 625A. Also including safety patchcords, 3x magnetic adaptors, 1x alligator clip and transport case.

Ready for measurements up to 140kW per single phase.

The device comes with an internal memory of 8MB. When using a 15 minute interval to record the data in the internal .CSV-file this is sufficient for up to one year of measurements. If you plan to use more detailed logging (writing a dataset every few seconds), we recommend to add the memory extension X1 (below) to extend the memory to 16GB with the included SD card (we will install it for you).

This pack contains

in stock

Power supplyMagnetic test tips and crocodile clamps on U1, U2, U3 and N, no additional power supply needed.
Diameter magnetic test tips6,6mm
Measurement range (voltage)240V against Neutral, 400V Phase-Phase
Operational range100-240 V (between Neutral and Phase 1)
Inputs3+1 for Voltage and Neutral, 3 Current
Measurement range 1, only CTs0.5A to 80A (max. cable width: 10mm)
Measurement range 2, Rogowski coils without integrator, 50mV/kA2A to 1250A (Inner diameter: 25mm, 30mm, 50mm)
Measurement range 3, Rogowski coils without integrator, 50mV/kA2A to 2500A (Inner diameter: 100mm)
Measurement range 4, Rogowski coils without integrator, 105mV/kA3A to 4800A (Inner diameter: 150mm)
Input for current sensors±0,33V or ±0,5V
Accuracy± 1% for U, I, P, S, L and Q. All devices are calibrated and are shipped with a certificate.
Sample rate~24.000 samples/sec
Memory8MB flash memory or 16GB sdhc-card (non removable). The extension from 8MB to 16GB can be retrofitted at any time. See also: Emonio X1 adapter in the shop.
Communicationinternal and external WiFi, MQTT
Interface3 LEDs
Operational temperature-5ºC to 60ºC
max. relative humidity85%
Size in mm (LxWxH)127,00 x 88,90 x 38,10mm
Weight (incl. cables and magnetic adapters, without current sensors)250g
Weight (incl. cables and magnetic adapters, with 80A current sensors)445g
Mounting optionsMagnetic back side, 3mm grommet
Over current categoryCAT III
Electromagnetic compatibilityTested according to EMC guidelines (2014/30/EU)
Electrical safetyTested according to LVD  (2014/35/EU)
EncryptionDefault: TLS 1.2

Installation Guide

Installation guide for X1 adapter

Download (425.48k)
User Manual (EN)

User Manual Emonio P3 (english)

Download (9.75M)
User Manual (german)

User manual Emonio P3 (german)

Download (9.8M)

You might also like